By ignoring the often touted notion that Low Energy Nuclear Reactions (LENR) is impossible and taking the view that it is both a natural and ubiquitous process, let’s let evidence guide us.

Video 1: Overview

This presentation makes extensive used of the net positive stable nuclear reaction data established by Dr. Alexander Parkhomov and made into searchable tables by Philip Power and Denis Lamotte.

Earth’s crust atomic abundance

Ever wondered why elements have the abundance they do in the earths crust?


Figure 1: Abundance of atoms in the Earth’s crust SOURCE

George Ohsawa reactions

Perhaps George Ohsawa reactions can give us a clue?


Figure 2: George Ohsawa reaction tree

Table 1: George Ohsawa reaction energy ranges
So the reactions observed in NOVA testing have net energy releases according to Dr. Alexander Parkhomov’s data of between 12.7214 and 28.3202 MeV.

*Not observed by Dr. George Egely, perhaps because it has quite high atomic volume and there are energetically favourable reactions of Sc with O > Cu, with N > Ni, with H or D > Ti. Also if first F is produced by combining H/D with O then this fusing with Sc produces Zn.



Figure 3: Old Soviet table, uncertain what state of matter the density calculations are based on SOURCE annotated with observed transmuted elements compiled by George Miley with additional elements observed to date by MFMP

In addition, there are some net positive nucleon exchange reactions between George Ohsawa reaction products, just looking at the 2º ones for example:

Table 2: Reactions between George Ohsawa reaction products Al, P and Si
With the most energetic of the Al + P reactions producing 4He and 54Fe, both elements with low distortion of the physical vacuum according to Stoyan Sarg.

Explaining ECCO fuel

Fuel processing

The processing of fuel is discussed here.


Figure 4: ECCO reactor fuel maker SOURCE

Analysis of part processed fuel showed large quantities of Pb, Zr and Nb, not meant to be in starting materials

Processed ECCO fuel had a lot of Pb, Zr, Nb in it as well as indications of Sn in addition to the H2O, Ti, C, Ni that were used. It was said by the inventor, Suhas Ralkar, that Tungsten (W) was added as a milling agent, however only some samples showed potential traces of W.


Figure 5: ECCO Fuel analysis

Figure 6: ECCO Fuel analysis SOURCE

Figure 7: SEM/EDS analysis of ECCO ultrasonically 'part processed' fuel. SOURCE

Strange radiation was observed emanating from ECCO fuel by various methods

Figure 8: Methods by which evidence of strange radiation was observed in relation to ECCO fuel - Photographic plate - Cosmic Ray Finder with Logitech 910C at angle to fuel and perpendicular-to-fuel - Olympus Laser Microscopy of non-contact PET - Macro photography of in-contact PET - Canon 7D Macro and NURUGO + Samung S7 microscopic video of part processed ECCO fuel

Other researchers that observed similar large scale synthesis of Pb

LeClaire / Nanospire, USA

Possibly similar to the ECCO fuel processor in that in both cases there was cavitation in water - Initial element combination were not the same however. LeClaire observed all elements including radioactive ones and in this authors opinion, this was because the active agent was driven very hard (leading to high mass isotopes) and destroyed, resulting in production of radioactive isotopes.

Figure 9: LeClaire / Nanospire showing high levels of Lead production and 'strange radiation' evidence
Mark LeClaire said in an interview on smart scarecrow show that it was easier to make
lead than to make gold.

S. V. Adamenko / Proton 21 Lab, Ukraine

This was an intense electrical discharge into a rounded end shaped fine anode of a pure metal.

Figure 10: S. V. Adamenko showing high levels of Lead production and 'new kinds of radiation' at Proton 21 Labs

Figure 11: 'New kinds of radiation' tracks observed by S.W. Adamenko
Adamenko used a "metal-dielectric-semiconductor" detector in the overall setup they developed as shown below.

Figure 12: Basic overview of Adamenko/Vysotskii experiment that observed ’new kinds of radiation’
The detector so designed is interesting, because it has the very good conductor Aluminium on the surface (4th best), often shown to be the most easily effected by John Hutchison. With it’s Metal / Dielectric / semiconductor structure, it also has impedance changes, which, according to shoulders observations, exotic vacuum objects (EVOs) do not like to pass through. Additionally the thin film of oil provides ready C and H.

The mystery of missing Tungsten (W)

When the MFMP first reported the elemental composition of part processed ECCO fuel ascertained by Masaryk University SEM operators to Suhas Ralkar, there was shock and disbelief. The high concentrations of Pb, Zr and Nb especially and traces of Sn made no sense, the whole purpose of the ultrasonic processor was to reduce the grain size of the source metals to around 5um. It was postulated that due to the high natural critical temperatures of Nb, Pb and Sn (in addition to the Ti that was in the inputs), the system was favouring 'highest temperature' elemental superconductors (though still very low!) A possible explanation for this was that the active agent may be atomising the elements, in which case, there is no lattice to support thermal vibrations and so the actual temperature may be in the low single digit Kelvins in the range these atoms super-conduct, this concept was presented at Asti on June 9 2017.

Suhas also claimed that Tungsten (W) was added to the raw materials to act as a milling agent, however we did not detect any W in the processed material above the SEMs certainty threshold (0.1 % in places and then only in some samples). At the time we honestly thought that it must have been omitted from the inputs of the sample we reviewed. As this blog was being written, Suhas wrote on a public forum

"You surely remember my telling you our Tungsten powder based ultrasonic milling during fuel preparation and then allowing part tungsten powder to remain in fuel."

• Suhas Ralkar, ECW, 13 May 2018

So we have a situation where W, if it was there, has disappeared, Pb and Zr have appeared in abundance with traces of Sn. So, does Dr. Alexander Parkhomov's data help us explain these observations?

Making Lead

Table 3: Proposed reactions in ECCO fuel processor
If the ECCO fuel preparation reaction path is as above, the W would be converted to isotopes of Zr and Sn (reaction #2). All of the Sn isotopes that are produced are used to synthesise Pb and Ar except Sn117 (reaction #3), which may account for the very small residual amounts of Sn. The overall reaction might not be reversible as the Ar produced may leave the water/reaction or because it is noble / not conductive.

All isotopes of Zr are produced by reaction #2, however, Zr can also be produced by fusing two Ca atoms, with one source of calcium atoms coming from George Ohsawa reactions. Also there is 16O + 204Pb > 96Zr + 124Sn : 143.9568 MeV with the 2 x Sn exchange to Pb + Ar, leading to a iterative settling of the overall mixture, including a reduction in 204Pb and skew to higher mass isotopes of Pb, just as observed in nature.

The abundance of Zr produced could lead to the observed Nb, given the presence of H (reaction #7) in H2O. The small amount of Si observed in one sample area could be due to standard Ohsawa reaction between C and O.

The proposed reaction considers the energetically favourable nature of the individual steps with all but the Sn+Sn > Ar+Pb reaction being net positive. It is this authors hypothesis that a hard driven reaction

In both Bolivian and Cornish Tin Oxide bearing seams, it should be noted that Wolframite is also found.

Pb based nucleon exchange reaction

There are 19466 nucleon exchange reactions that have a net positive yield with isotopes of Pb

Interestingly, out of all 516790 net positive nucleon exchange, 1389 fusion and 818 fission reactions, the following, noted above, is the 4th most energetic.

16O + 204Pb > 96Zr + 124Sn : 143.9568 MeV

Moreover, the atomic volume chart indicates that production of both Zr and Sn is favourable in an implosive process and the Earth’s crust abundance lends billions of years of evidence that this reaction path is desirable since both elements have high abundance relative to those adjacent to them. Furthermore Pb is often found naturally with several impurities.

• Tin and Antimony which has favourable nucleon exchange reactions of Pb with Cl, K and Ca.
• Silver which has favourable nucleon exchange reactions of Pb with Cl and K
• Gold
• Copper which has favourable nucleon exchange reactions of Pb with Cl, K, Ca, P, Cl and Ar., and
• Bismuth

Lead is often found naturally as Gelena or Lead (II) Sulphide - PbS - and there are a number of exchange reactions that yield Sn from S and Pb, however, it must be noted that S is just 2 x O as per George Ohsawa, so as a multi-atom nucleon reorganisation, it would be better to split the S and do O + Pb reactions.

So a reactor with the molten PbO electrolyte yielding 75 reactions, 25 of which exceed D + D fusion yield, would be ideal with the active agent in it stimulated, or nucleated and controlled. Use of molten PbO and discharges with electron promoters is exactly what is in the Ukrainian Borys Vasylyevych Bolotov’s 2001 priority patent, as discussed in the previous blogpost on making gold.

The most energetic is the following

12C + 204Pb > 86Kr + 130Te : 145.0821 MeV

It is interesting to note that without Suhas Ralkar actually intending it to, the ECCO reactor has Pb in addition to C and O and we have established it has the active agent in it as it produces copious amounts of strange radiation, even long after production.

The Alchemists also often had Pb, C and O in addition to K (an electron donor/stimulator for active agent production) in their experiments.

Furthermore, if we are to accept that the Pb is synthesised stepwise via implosion by a process that does not like to make unstable element isotopes, then an interrupted ECCO fuel processor may produce an unusual ratio of 204Pb since naturally it only constitutes 1.48% of Pb, with isotopes 206, 207 and 208 supposedly coming from radioactive decay of unstable elements. It is therefore extremely important to do a mass analysis on the ECCO fuel and determine the 204Pb abundance.

It must be noted that Zr is double Ca which is energetically favourable and there are vast numbers of nucleon exchange reactions that produce Ca, and 32 fusion reactions. Bolotov also noted that Zr is double Ca in his patent.


Figure 13: Bolotov noting the relationship between Ca and Zr SOURCE

We have previously discussed the production of Zr in LION reactors.. It is quite clear that appearance of Zr is an important sign of LENR reactions.

Interestingly, Bolotov has a wide range of inventions, one such invention claimed to produce Silicon from Al and P. Looking at the nucleon exchange data, we can see the second and fifth most energetically favourable reactions are conversions of Al + P > Si + Si. Again, we see that the data supports the hard one empirical findings of a seasoned researcher. This may also be why P is often not observed in George Ohsawa reactions (in addition to its low boiling point) and one reason why it’s abundance in the crust is significantly below that of Si.

Moreover the patent says that high current density is required.

“A method for producing silicon comprising the production of high pressure elemental silicon from chemical elements of aluminium and phosphorus by the action of an electric current of a density greater than 1011 A / m^2”

So like many researchers, high electron density precipitates the effect. One such researcher, V. Krivitsky, proposes pulses of 7-10kA at 1000V with a frequency of 450kHz. a claim that has similarities to both Adamenko and Ralkar.

What then is ‘New Fire’ Fuel?

The implications of this work is that the New Fire, ‘LENR fuel’ has to have the active agent + elemental feedstock rather than just the elements that made the active agent (which may include some of those in the elemental feedstock). No active agent, no reactions.

Piantelli told us, you can make the ‘fuel' externally to the reactor or in the reactor and did both. This expressly implies that the elements themselves are insufficient.

me356, Suhas Ralkar, Holmlid and likely Rossi make it externally - it is the natural thing to do once it is understood at least on a cause and effect basis. From a commercial point of view, it also makes sense to not have the sold reactor able to produce the active agent. Moreover, you would engineer the sold reactor to cause the rapid degradation of the active agent if the sold reactor is tampered with. In this authors view, simple contact with water or moist air would be adequate.

Hutchison guided the nucleated active agent to the work area and grew and manipulated them there. Egely, Adamenko and others make the active agent in the reaction zone and then stimulate it at same time. Shoulders did both - you know this because he says he can store in metals indefinitely until intentionally put to work.

In the case of ECCO, more PbO could be added to the active agent containing seed ‘fuel’ as feedstock to enable longer duration reactions.

Targeting valuable metals

We have already started to discuss the production of Gold, so lets look at another valuable metal. At the time of writing, the value of Ir is over $43300/kg. By looking at the atomic volume chart and taking the view that the process is an implosive one, we know that we will need an element above the mass of Ir that has as high atomic volume as possible and one that is right at the other end of the periodic table, preferably, again with high atomic volume. The most favourable reactions will be those that can lead to the lowest atomic volume of the solid/liquid products whilst maintaining stability, that these will yield the most energy output may mean that, under the right circumstances, the overall net energy balance may be positive.

The obvious heavy (alchemical) metals for this purpose are

Table 4: Proposed reactions to target production of Iridium

Rhodium is even more valuable, at the time of this writing it is nearly $72000/kg So perhaps voltage biased, high current/voltage, high frequency discharges through molten lead chloride might yield valuable precipitations of Rhodium and evolution of Xenon gas. This is not a reaction for the average home-lab however. The interesting point here is that the noble gas Xe produced has a high atomic volume, something to consider.

Another option might be discharges through Zn and Pb, since they have similar low melting points, and the products, Rh and Ho have very high melting points.

Conclusion

This author has already written about some of the physical observations one can look for both during an experiment and after that indicates presence of the active agent.

In the view of this author, feedstock choices depend on many factors, some of which, in no particular order are:

• electrical conductivity
• electronegativity
• melting point and miscibility of components
• strength of the active agent / driving intensity and resonance (relates to level of implosive action)
• the net atomic volume of solid/liquid products compared to feedstock which is related to energetic favourability of the product balance

By having an idea of the output elements desired one can use the data provided by Dr. Alexander Pakhomov at FusFis.org, to establish potential reagent / element / phase choices for a process to target an element.

Non-exhaustive overview of some ’New Fire’ embodiments

The active agent can be made, stored, grown, harvested, used and abused in a variety of ways to effect excess heat, light, electricity, particles, transmutation and more. For examples, as shown above, the active agent can be advantageously used with element combinations that lead to desirable energy or element production. Choice of isotopes to use as feedstocks with the active agent would depend on physical parameters such as pressure, temperature, corrosiveness, phase, electro-negativity etc.

Natural Lightning

Make and break in bolt
Make and sustain in persistent ball lightning

Organic Life

Synthesises / captures and uses very small active agent

Mexican Alchemists

Harvested from environment and deployed

Tesla

Harvested from dry Utah environment and made active agent.

Henry Moray

Harvested from dry Utah environment and grew active agent ( acts like Dyson Air Multiplier description/patent )

Boris Bolotov

Made and destroyed active agent in an instant

Joseph Papp

Made active agent externally for first patent and internally to reactor for later patent, grew and harvested.

George Ohsawa

Made and destroyed active agent in an instant

John Hutchison

Guided nucleated active agents to zone where they were grown and manipulated. Typical transmutation was Al + Al > Fe

Kenneth Shoulders

Made, grew, stored and deployed in apparatus using say Hg and Kr

Alexander Chernetski

Made, grew and destroyed in apparatus with some ancillary effects of destruction observed

Pons and Fleischmann

Made, grew and triggered, with one major example of extreme.

Francesco Piantelli

Made, grew and harvested

Canon Patent

Made and then deployed active agent in cell

German Patent

Made and then deployed active agent in cell with D and Xe, both optimal in their own right for construction, leading to D + D fusion since D + Xe is less energetically favourable There is 31 possible D + Xe nucleon exchange reactions, but only 2 are more energetically favourable than D + D fusion and each DD fusion halves the distortion in the physical vacuum, making it highly desirable in an implosion basis.

Stanislav Adamenko

Made and destroyed active agent in an instant, saw wide range of ancillary effects of destruction.

Norris Peery

Made, grew and over excited to destruction in reactor.

Andrea Rossi

Made active agent in cell, likely first with the good old alchemical choice of K for lower temperature activation, then later Li for higher temperature operation and better yield, in combination with Al, which has a both nucleon exchange and fusion reactions to Fe that can then progress to Ni and Cu

Francesco Celani

Made, grew and sustained in wires

George Egely

Made, grew and over excited to destruction in reactor.

Leif Holmlid

Made and fed active agent and observed breakup.

Suhas Ralkar

Made, Grew and stored active agent in metal fuel externally. Cyclically, grown, harvested and destroyed in reactor

Anatolij Vachaev

Similar to Bolotov’s 1956 work, made and destroyed active agent in an instant

Clean Planet/Mizuno

Similar to Canon patent, but simplification. Made, grew and over excited to destruction in reactor

LION reactor 1/2

Strange radiation and other tracks similar to Shoulders observations + transmutation of materials, including to Zr observed.
Nucleated active agent in core. Grown over days in reactor materials.

---

We thank all those generous donors out there that make this work possible

For those interested in an open working New Fire reactor technology becoming available, please consider a PayPal donation here or via our MFMP Donation page where your name will be listed in the record of donors.

The project looses 4.5% on Paypal donations, so for those that can do a direct bank transfer, donations of any size can be made direct to Quantum Heat C.I.C.s (the organisation that runs the MFMP) bank account here, thus saving charges:

BANK: HSBC
Branch Address: 153 North Street Brighton, East Sussex, BN1 1SW
Account Name: Quantum Heat C.I.C
Sort Code: 40-14-03
Acc No.: 12631571
IBAN: GB48MIDL40140312631571
SWIFTBIC: MIDLGB22

Or bitcoin: 1JesTRUXU8jHb1haa1MoF2NvrU8gt5msCr

If you would like to help the volunteer researcher that produced this blog article and conducted the analysis work >behind it, you can donate directly here.

Alternatively there is a US 501.c3 that also supports the goals of the MFMP, you can request information on how to contribute by that route by writing an email to m.fleischmann.memorial@gmail.com