How does scooters get Acceleration ??

in #howto7 years ago (edited)


DQmRWydVXS9sVoS6ubMcVqJY5wy4NRmAUXNGwsja65NFS3T_1680x8400.png



  • Scooters were meant to be easy, and so a lot of complication has gone into making them simple.


  • Here’s how to demystify the transmission without even getting your hands dirty.
    The biggest development in the scooter world began since the invention of Constantly Variable Transmission (CVT).



    images (1).jpg



    Screenshots_2017-11-15-12-15-19.png



    Scooter engines, like all automotive engines, need gearboxes to make them more efficient at driving the vehicle. Without a gearbox, a scooter’s speed would be completely dependent on the engine speed as the ratio between the engine and the rear wheel would be fixed like an old single speed bicycle.

  • Good enough to chug along on the flat, but remember how you’d run out of legs downhill, and uphill? Getting off and walking was often easier.
  • Remember getting your first three-speed hub-gear bicycle? And what a difference it made? Then you traded up to a 10-speed derailleur machine. Remember how much easier life became? Sure, you still had to shift manually, and you could get caught in the wrong gear at the wrong time, but when things went right, you could really fly.
  • That was the thing about having 10 gears. You could be in the right gear more often, and maximise your pedalling power. A modern scooter is the same, but instead of 10 gears it has only one, though that single gear is infinitely flexible, taking you from tickover to top speed. Here’s how it works.
  • The 10-speed bike had two gears (or chain rings) at the front and five at the back.
    By operating the gear levers, you shifted the chain between the chainrings and changing the gearing. There were a lot to choose from, but the basic rule was a small gear at the front and a large gear at the back was low gearing, suitable for climbing hills and low speeds (because each pedal stroke caused less rotation at the rear wheel), while a large cog at the front and a small cog at the rear was the highest gear (because each pedal stroke turned the rear wheel more). Moving the chain from cog to cog required extra, spring loaded chain length to fit the different sized gears. While scooter transmissions run on the basic big cog/little cog premise but there are differences.

  • Screenshots_2017-11-15-12-02-54.png


  • There are no separate gears and no extra length to the drive belt to accommodate gearshifts. That is how the transmission works as a Constantly Variable Transmission (CVT) system.
    The front and rear cogs of your pushbike have been replaced by a pair of pulleys in your scooter, each pulley made up of two, conical, sliding halves with a fixed length belt running between them. The front pulley is driven by the engine, via gears from the crankshaft. The rear pulley drives the rear wheel, again via gears. In between that and the rear wheel is an automatic clutch,so the engine can idle when the Scooter is stopped.

  • Screenshots_2017-11-15-11-14-28.png


    images.jpeg


  • It is the sliding nature of the pulleys that creates the really clever CVT. At rest, the front pulley halves are held open by springs, while the rear pulley halves are held shut. This gives the ‘small gear at the front and large gear at the back’ effect of the lowest gear on a 10-speed bicycle. As you accelerate, the front pulley halves close together and that forces the rear pulley halves apart. Remember, the belt that runs between the pulleys has a fixed length, so when the front pulley closes up, the belt has to force the rear pulley apart. When the front pulley halves are forced completely together, the rear ones are forced completely apart and then you have the large front cog and small rear cog of a 10-speed bicycle’s highest gear. The clever part is that, as the pulleys move apart and close together, the gearing shifts constantly so that two things happen: you never have to change gears; and you never find yourself in the wrong gear. Brilliant, huh? So how does the scooter know how to change gear? With another clever little piece of kit called the variator as shown !


    Screenshots_2017-11-15-11-21-00.png


  • This is a disc-shaped thingy that is fitted to the same shaft as the front pulley. It has a sloped section and carries a number of weighted rollers in a cage around the disc. As the assembly spins, these rollers react to centrifugal force and try to move outwards. As they do so, the assembly climbs the ramp and forces the front pulley closed, which in turn forces the rear pulley open and thus raises the gearing.


  • When you roll off the throttle, the centrifugal force is reduced and the spring loaded rollers drop back, allowing the front pulley to open slightly, which allows the belt to ride lower within the spring-loaded, sliding halves of the pulley, which in turn allows the rear pulley to close up and lower the gearing.

    Screenshots_2017-11-15-12-28-58.png<>center

  • It sounds complex to describe, but it makes riding a scooter far simpler than the old hand-shift set-up. And that’s a good thing, Be happy


  • **Thanks for you all.
    And have a nice day. **

    DQmbg612fRjQcx9KfvCFx4S1DhNsYzirZ72L5tjyQiWUzFu_1680x8400.jpg

    DQmYSSeG2hgNd62hswifcNs64Ebvr2zpUhuxNZ7w4kqyJ3E_1680x8400.jpg

    Hint ...

    ggg.png

    JOIN US

    I powered up my account to help any arabic post or author in the arabic community .
    if you need support just comment with(#promo-egypt) and i will take a look at you post and upvote it and if you spreed the word about this and about the idea of promoting steemit you will fined even more support.

    الى كل المبدعين والمستخدمين منصة ستيم ات لقد قمت بشحن قوتي كي اقدم الدعم للمواضيع العربية والكتاب العرب باللغتين العربية والانجليزية
    إذا كنت تريد الدعم فقط علق على موضوع من مواضيعي واكتب في التعليق
    #promo-egypt
    وإذا نشرت هذا في موضوعاتك ستجد دعم بشكل أكبر واتمني التوفيق للجميع

    DQmYSSeG2hgNd62hswifcNs64Ebvr2zpUhuxNZ7w4kqyJ3E_1680x8400.jpg

    --If you wanna help me more you can use this affiliate link if you like--.


    VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV

    https://spectrocoin.com/en/signup.html?referralId=2086930541&refTrackId=001"https://spectrocoin.com/en/signup.html?referralId=2086930541&refTrackId=001

    SB Banner NEW.png

  • Sort:  

    Not indicating that the content you copy/paste is not your original work could be seen as plagiarism.

    Some tips to share content and add value:

    • Using a few sentences from your source in “quotes.” Use HTML tags or Markdown.
    • Linking to your source
    • Include your own original thoughts and ideas on what you have shared.

    Repeated plagiarized posts are considered spam. Spam is discouraged by the community, and may result in action from the cheetah bot.

    Creative Commons: If you are posting content under a Creative Commons license, please attribute and link according to the specific license. If you are posting content under CC0 or Public Domain please consider noting that at the end of your post.

    If you are actually the original author, please do reply to let us know!

    Thank You!

    Hi! I am a robot. I just upvoted you! I found similar content that readers might be interested in:
    https://www.scribd.com/document/253710926/Continuously-Variable-Transmission-Cv-t-Explained

    This post has received a 2.07 % upvote from @buildawhale thanks to: @omar-hesham. Send at least 1 SBD to @buildawhale with a post link in the memo field for a portion of the next vote.

    To support our daily curation initiative, please vote on my owner, @themarkymark, as a Steem Witness