---

Hello, friends especially diy ers!

---

Last weekend i finally could finish a cute adorable bunny birthday card for my best friend. Although her birthday is still far away i already want to spend my time to make a bunny birthday card for her, because she loves bunny so much. Now without anymore prologue, let just begin!

---

Project Time: approximately 5 hours

---

Difficulty: easy

---

Materials & things needed:

• drawing paper
• pencil
• 0.5 drawing pen
• eraser
• scissors
• ruler
• zig zag scissors
• medium blue cardboard
• green paper, soft pink paper, pearl green paper and soft purple paper
• glue stick
• soft pink and medium pink color pencil
• double sided tape with the sponge in it (so it would give 3D effect)
• glitter glue in silver and gold

---

How to make it:

---

1ST

First i measured the drawing paper 15 cm width, cut it off then i cut a bit of the untidy part, so the length became 29 cm. After that, i drew the bunny body with two hands on its' left and right.

---

2ND

Then i also drew the ears, face, and two feet. I cut them off. These would all be the pattern. To make sure the body was symettric i folded the paper with bunny drawing in the middle before cutting it.

---

3TH

I drew the small parts of one foot inside. Then i cut both feet. After that i cut the grass with the zig zag scissors.

---

4TH

After i tried it on the white card i suddenly changed my mind. The drawing paper would look pale if i used it as the card, so then i measured the same size of it, 15 cm x 29 cm, on blue cardboard then cut it off and folded it in the middle. After that, i glued the green grass on bottom part of it.

---

5TH

Then, i transferred the pattern on a piece of drawing paper. Edited the hands cause i want it a bit lower. Then i cut them off and erased the pencil drawing in it. After that i cut the pattern, inside of the feet small parts.

---

6TH

Next i also cut inside the ear areas of the pattern. I transferred what i cut, on a piece of soft pink paper. Cut them off then glued them in ears and feet, just like in the picture.

---

7TH

For the face, i drew it with pencil then bolded it wiht the drawing pen. For the nose, i glued soft pink little oval and for the cheeks, i drew two circles with pink color pencils: soft pink first then medium pink around.

---

8TH

Next i drew the cupcake in pearl green and soft purple just like below. Cut them off. I cut my double tape then pasted it on the bunny, just like on the picture.

---

9TH

First, i glued the bunny's ears on the blue cardboard, then for the head and body, i put the double tape behind. Pasted it on the cardboard. Next two feet. Last, i put on the glitter on it too.

---

The Result

Voila here is the 3D bunny birthday card i made..

Isn't it cute?

---

Thanks for having my article, hope you enjoy it and stay tune for more CRAFT things from me!

---

All the pictures were taken with samsung A52 5G.

---

---

A bit about the author

---