The right way to rig a piston ring

There are ways to attach the correct and appropriate piston rings for an automobile. Of course the autofamily must not install their own piston rings at random, man. If the installation is faulty, the engine performance will have a considerable negative impact. Curious that mari simakhad carefully assembled the piston rings of cars, listened to the full range below together:

1. Unload the engine first
   The first step you have to do is dismantle the machine. Keep demolition this useful to get the piston parts to be replaced. And make sure you know where the piston rings are gonna be.
   autism
2. Remove the piston ring
   When you find a piece on the piston, you remove one piston ring at a time, and you will need three piston rings to separate, which is a compression ring of 1, 2, and an oil ring. Get the whole piston out of here so we can move on to the next step, buddy
3. Clean the fuse groop. guys
   Before you do the framing, clean the groove or groove. Cleaning the shaft from which the piston ring is applied could use a brush or a high-pressure wind compressor. You will see to it that there is no more dirt or dust left in the grooves to keep the new piston rings installed.
4. Use the next compression piston ring
   When you're sure it's clean, you can now install a compression 1 piston ring as the first part. And you have to look at the code letters that have to look up. Do not let the tide tip over because it is impacting the damage already in use.
   autism
5. Use the piston rings compression two and don't forget
   Now you can put in a piston ring compression 2 or in the middle. Also make sure that the code of letters has to look up so that it doesn't bring any trouble to later buddy
6. Fuse oil
   Lastly, the oil ring is at the bottom, and the oil ring has three sections, which are the top rail, the spiral exander, and the lower rail rings. The installation must go in order to be used on the maximum when it is installed.
   autism
7. Plug it back into the block cylinder
   If the installation of a piston ring is correct, you can attach it back to the piston in a block cylinder. Easy, right?

The tapering effect of the piston ring ,We need to remember not to let the installing of the piston rings flip over Pal. There are some issues that are gonna come up, like:

autism

Your engine will be removing white smoke from the exhaust

The machines are very difficult to turn back on
There was this sound of squeaking on the side of the machine
The machine seemed to have no power
friend