Hay steemians friend, drilled well is very useful in the dry season, into the deep well drill is not possible the water can dry ,,
The depth of the well is a good drill well for clean water out sendiri.Setiap region with the state of different geographical conditions of course have different standards for obtaining clean water from drilled wells. By drilling with the depth of the ideal well drilled water will be obtained a source of clean water and good for consumption. ,,,
For lowland areas that have a depth of water source averaging about 6 to 10 meters will usually contain water sources that include medium quality. This is due to the depth there is still a possibility that the source of water obtained still contains elements of water absorption from the surrounding environment.
,,, Creating a well drill for clean water Regarding tips on making the most wells drill right to get clean water quality can actually be done with the right technical though the location is in the lowland plateau or plateau. To be able to obtain a good source of water should be a wellbill drillers can understand the soil structure of drilling holes in each layer of soil.Simak also on how to find the source ground water.
Full drill location lowland At the lowland location, although at a depth of 4 to 10 meters already has an abundant source of water should be at least ascertained whether the soil structure is still muddy, sandy, rocky or cadas.If found to be still muddy, then the well depth of the well should be added to obtain a sandy soil layer or hard ground soil. That means we will ignore the water source that is on the top surface and catch up to get groundwater source under the layer because technically groundwater bottom layer will have better quality because it is far from the risk of environmental pollution.
To overcome the effects absorption from surface water sources, l drill bore wells must be pipe casing pipe to cross the border of the muddy soil layer.With this will minimize the level of pollution and of course the water obtained will be much better and feasible as a source of consumption water.Read also about the technical installation of drill casing pipe.Sumur drill location plains high As explained briefly above that for the location of drill wells in the highlands will have a fairly good water quality although difficulty to get it is constrained by the depth that sometimes is very costly.
The level of pollution from the environment is still very minimal for the type well placing the casing pipe is not absolute to protect the quality of water but rather on maintaining the wellbore safety from damage caused by landslides, rocks or other events. So the conclusion that to obtain a source of clean water can not be determined by the capacity of water the abundance or depth that must be achieved.
Not infrequently also if the drilling is too deep it will lose the source of water because it has penetrated the layer of vacant soil so that the water flow is actually sucked into.
Congratulations @zallina! You have completed some achievement on Steemit and have been rewarded with new badge(s) :
You got your First payout
Award for the total payout received
Click on any badge to view your own Board of Honor on SteemitBoard.
To support your work, I also upvoted your post!
For more information about SteemitBoard, click here
If you no longer want to receive notifications, reply to this comment with the word
STOP