Posts

Comments

Payouts

• robotics101 (62)in StemSocial • 3 years ago

  Node-Red, the Swiss army knife for Internet Of Things ?

  Hey everyone, I told you in a previous article about a project that has been on my mind for several years, today we're going to look at how we're going to talk with this…

  $22.71

  • Past Payouts $22.71
  • - Author $11.44
  • - Curators $11.27

   485 16
• robotics101 (62)in La Ruche • 3 years ago

  Node-RED, la solution à tous les problèmes de l'Internet des Objets (IOT) ?

  Bonjour à tous, Je vous ai parlé dans un précédent article d'un projet qui me trotte dans la tête depuis plusieurs années, aujourd'hui on va regarder comment on va discuter…

  $10.56

  • Past Payouts $10.56
  • - Author $5.29
  • - Curators $5.27

   61 0
• robotics101 (62)in StemSocial • 3 years ago

  Investigating how computers communicate

  Hi everyone! Before we get started on the connected indoor garden project, I wanted to tell you a little bit about communication between electronic devices. Background…

  $30.16

  • Past Payouts $30.16
  • - Author $15.16
  • - Curators $15.00

   378 6
• robotics101 (62)in La Ruche • 3 years ago

  Comment communiquent les ordinateurs ?

  Bonjour à tous, Avant de commencer le projet de potager connecté, je voulais vous parler un peu de la communication entre les appareils électroniques. Source de l'image…

  $26.69

  • Past Payouts $26.69
  • - Author $13.41
  • - Curators $13.28

   282 7
• robotics101 (62)in StemSocial • 3 years ago

  Indoor Garden | Preliminary Researches

  Today, I wanted to talk about a project I have for a very long time, growing fruits and vegetables in my flat. I'm going to approach this project differently this time, because I…

  $41.46

  • Past Payouts $41.46
  • - Author $20.82
  • - Curators $20.64

   403 22
• robotics101 (62)in La Ruche • 3 years ago

  Potager d'intérieur | Recherches Préliminaires

  Bonjour à tous, Aujourd'hui je reviens avec un article à propos d'un projet qui consiste à faire pousser chez moi des plantes aromatiques, mais aussi des fruits et légumes.…

  $50.63

  • Past Payouts $50.63
  • - Author $25.44
  • - Curators $25.19

   466 17
• robotics101 (62)in StemSocial • 3 years ago

  Community Celebration: STEMsocial

  For the Community Celebration Week @guiltyparties is challenging all Hive users to post about their favorite community

  $43.20

  • Past Payouts $43.20
  • - Author $21.71
  • - Curators $21.49

   411 8
• robotics101 (62)in Let's Make a Collage • 3 years ago

  My Entry for the Let's Make A Collage - Arts & Science - STEMSocial Special

  Hey everyone, Today, it's not an article about a STEM topic, or is it? What would you do if you had to make a collage about dark matter ? (Try to read that again with…

  $59.79

  • Past Payouts $59.79
  • - Author $29.99
  • - Curators & beneficiaries $29.81
  • > lmac: $5.98
  • > quantumg: $0.60
  • > stemsocial: $1.49

   297 4
• robotics101 (62)in La Ruche • 3 years ago

  Ceci n'est pas une bulle ! Ou Comment Vous Pouvez Utiliser Un Réseau Neuronal Pour Détecter Des Objets Personnalisés

  Bonjour à tous, Récemment j'ai lu un article par @mengene qui explique comment il a utilisé des méthodes de Deep Learning in biologie. Ça m'a inspiré à écrire mon propre article…

  $58.60

  • Past Payouts $58.60
  • - Author $29.49
  • - Curators $29.11

   620 9
• robotics101 (62)in StemSocial • 3 years ago

  Look at these bubbles! Or How You Can Use A Neural Network To Detect Custom Objects In Pictures

  Hey everyone, Recently, I read a post by @mengene explaining how deep learning was used in biology. It inspired me to write this article about how I used a neural network in a…

  $36.93

  • Past Payouts $36.93
  • - Author $18.59
  • - Curators $18.35

   491 8
• robotics101 (62)in StemSocial • 4 years ago

  Precious Plastic - Technologies for the Future #1

  Today I'd like to present you Precious Plastic, an initiative to bring local plastic recycling everywhere on the globe.

  $35.09

  • Past Payouts $35.09
  • - Author $19.06
  • - Curators & beneficiaries $16.04
  • > stemsocial: $0.88

   93 1
• robotics101 (62)in StemSocial • 4 years ago

  Precious Plastic - Des Technologies Pour Le Futur #1

  Aujourd'hui, je vous présente Precious Plastic ou comment démocratiser le recyclage du plastique à petite échelle.

  $8.38

  • Past Payouts $8.38
  • - Author $4.92
  • - Curators & beneficiaries $3.47
  • > stemsocial: $0.21

   54 2
• robotics101 (62)in StemSocial • 5 years ago

  Strengths and weaknesses of 3D printing in crises situations and in general

  3D printing is not the perfect tool for every usage and we are going to see through this article why you should use it or not and how 3D printing can be useful during crises…

  $23.25

  • Past Payouts $23.25
  • - Author $12.06
  • - Curators & beneficiaries $11.20
  • > stemsocial: $0.58

   566 21
• robotics101 (62)in StemSocial • 5 years ago

  Introduction to 3D printing at home

  Today, I wanted to talk about 3D printing, among other things because that's what I was most recently busy with during the lockdown in France. I would like to discuss with you…

  $69.07

  • Past Payouts $69.07
  • - Author $34.63
  • - Curators & beneficiaries $34.44
  • > stemsocial: $1.73

   784 17
• robotics101 (62)in StemSocial • 5 years ago

  How to control a drone remotely? Part 1: The Transmitter [Building a Quadcopter#3]

  For the third article of this series devoted to the construction of a racing drone (or UAV, Unmanned Aerial Vehicle), we will talk about the remote control. What, how, and why…

  $10.60

  • Past Payouts $10.60
  • - Author $5.33
  • - Curators & beneficiaries $5.27
  • > stemsocial: $0.27

   503 11
• robotics101 (62)in StemSocial • 5 years ago

  Les forces et les faiblesses de l'impression 3D en situation de crise et en temps normal

  Bonjour à tous ! Donc aujourd'hui on va parler des arguments pour utiliser ou non l'impression 3D et de son utilité lors de crises au travers de mon expérience lors de celle du…

  $21.45

  • Past Payouts $21.45
  • - Author $10.97
  • - Curators & beneficiaries $10.48
  • > stemsocial: $0.54

   532 15
• robotics101 (62)in StemSocial • 5 years ago

  Introduction à l'impression 3D à la maison

  Bonjour à tous ! Pour mon premier article après une longue absence, je voulais parler de l'impression 3D, entre autres car c'est cela qui m'a occupé le plus récemment lors du…

  $12.98

  • Past Payouts $12.98
  • - Author $6.53
  • - Curators & beneficiaries $6.45
  • > stemsocial: $0.32

   458 12
• robotics101 (62)in #steemstem • 5 years ago

  Comment contrôler un drone à distance ? Partie 1 : L'émetteur [Construire un drone #3]

  Bonjour à tous ! Pour le troisième article de cette série consacrée à la construction d'un drone de course on va parler du contrôle à distance. Quoi, comment pourquoi, on…

  $5.82

  • Past Payouts $5.82
  • - Author $4.40
  • - Curators & beneficiaries $1.42
  • > steemstem: $1.46

   682 9
• robotics101 (62)in #steempress • 5 years ago

  Erreur

  Erreur

  $0.05

  • Past Payouts $0.05
  • - Author $0.04
  • - Curators & beneficiaries $0.01
  • > steempress: $0.00

   9 8
• robotics101 (62)in #steemstem • 6 years ago

  What is Electricity and Understanding the Batteries [Building a Quadcopter#2]

  Photo by Jesse Collins | License For this second episode of the series which presents the different features of a drone I would like to talk about batteries but before…

  $47.52

  • Past Payouts $47.52
  • - Author $35.91
  • - Curators $11.60

   492 16